Language:       
High-quality products
&
professional services
 
Material Level Control
 
Flow Instrumenst
 
Gas/Liquid Analytical
 
Electrical Products
 
Other Products
 
Process Weighing
 

Transducers for Angular Position

Linear Acquisition of Angular Positions These conventional rotation angle transmitters measure the position of a shaft and convert it into a proportional DC signal. The angle is determined by two differential capacitators. This patented analog measuring method is insensitive to shock, vibration, magnetic fields and is superior to optical methods in rough environment. Measurement ranges from 5° up to 270° are possible. Depending on the application the OEM type, field type housing, the ruggedized version for machine-building or the transmitter for position feedback may be selected. There are also versions to be used directly within hazardous areas. Linearizable Acquisition of Angular Positions Also the linearizable rotation angle transmitters measure angle positions by means of a patented non-contact, capacitive principle which is therefore completely free of any wear and tear. But the transfer characteristic between angle and output signal is freely configurable. Depending on the application the OEM type, field type housing, the ruggedized version for machine-building or the transmitter for position feedback may be selected. There are also versions to be used directly within hazardous areas. The device features are fully PC configurable. This has a lot of advantages. So each transmitter can be adapted to his task on-site. Service functions support the user during installation and fine-tuning. For the recording of the linearization characteristic a auxiliary tool is provided, which e.g. allows to record the fill curve of a tank by filling or evacuating.

Name Product show Description Remarks
KINAX 3W2 angular positions transmitters
Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft.
A load-independent DC signal with a range of 4 to 20 mA is made available at the measurement output.
 
KINAX WT710/711 angular positions transmitters
Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft.
A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement output. It is especially well suited for surface mounting to equipment and apparatus thanks to its compact design.
 
KINAX 2W2 angular positions transmitter
Transmitter with a contact free, capacitive sensor system for the acquisition of the angular position of a shaft.
The output is a load-independent DC current signal of 4...20 mA proportional to the measured value.
 
KINAX SR709/719 angular positions transmitters
Measuring transmitter for acquiring stroke travel at valves, butterfly valves, slides and other actuators.
The transducer converts the measured quantity into a load-independent direct current which is proportional to the measured value.
 
KINAX WT707/717 angular positions transmitters
KINAX WT707
Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft.
A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement output. Due to its rugged design, it is used primarily in machinery manufacturing and shipbuilding.
 
Next Last
 Go
2010©Copyright  Combine instruments Co.,ltd allrights revered
USA:17888 67TH COURT NORTH LOXAHATCHEE FL 33470 US Post:FL33470
CHINA: No.40,JinFengXi Road,National Hi-Tech Industry Development Zone,ZhuHai,GuangDong,China
Tel:+0086 756 3895799 Fax:0086 756 3892788 E-mail:sales@combine-inst.com ICP10058053

COMBINE INSTRUMENTS   Batching System  Loss-in-weight-feeder