Transmitter with a contact free, capacitive sensor system for the acquisition of the angular position of a shaft.
The output is a load-independent DC current signal of 4...20 mA proportional to the measured value.
-
Patented contact free capacitive sensor system
-
Measuring range, direction of rotation, characteristic, switching point and other additional functions programmed using PC / Simplifies project planning and engineering, short delivery times, low stocks
-
Measuring range of angle of rotation: 0...10 to 0...50 or 0...50 to 0...350?BR>
-
Measuring output (output/powering circuit) in two-wire connection (4...20 mA signal)
-
Very low torque (< 0.001 Ncm, with 2 mm shaft)
-
Advantage: The shaft can be rotated practically without any reaction effects and is therefore not a 玪oad?on the connected devices.
-
Compact size, only 48 mm diameter
-
Advantage: it can be installed anywhere (OEM)
-
Type of protection “Intrinsically safe” EEx ia IIC T6 / Can be mounted within the hazardous area
-
Simulation of measured values / The testing of the subsequent device chain is already possible during the installation phase
-
Measured value acquisition / Display of the instantaneous value and a trend graph of the measured value on the screen
-
Adjustment / Independent fine adjustment of the analog output, zero position and measuring range
-
Characteristic of the output value /
-
Programmable as a linear, V-characteristic, or any characteristic curve
-
The shaft can be turned through a full 360?BR>
-
Serial interface
