SINEAX P530
Measuring transducer for the conversion of active power in single phase alternating current or 3-phase systems with balanced or unbalanced load.
A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured active power value.
- Measuring method: TDM method
- Measurement inputs: sinusoidal nominal input current 1...6 A and nominal input voltage 100...690 V(L-L)
- Nominal input frequency: 50 or 60Hz
- Measurement output: unipolar, bipolar or live-zero output quantities
- Power supply: integrated AC-DC power pack with large tolerance range for universal use
- Housing for top-hat rail mounting
- Certifications: CSA, GL (Germanischer Lloyd)
SINEAX Q531
Measuring transducer for the conversion of reactive power in single phase alternating current or 3-phase systems with balanced or unbalanced load.
A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured reactive power value.
- Measuring method: TDM method
- Measurement inputs: sinusoidal nominal input current 1...6 A and nominal input voltage 100...690 V (L-L)
- Nominal input frequency: 50 or 60Hz
- Measurement output: unipolar, bipolar or live-zero output quantities
- Power supply: integrated AC/DC power pack with large tolerance range for universal use
- Housing for top-hat rail mounting
- Certifications: CSA, GL (Germanischer Lloyd)
SINEAX P600
Measuring transducer for the conversion of active power of undulatory voltage and current (containing AC and DC components) into an output signal which is proportional to the measured value.
- Measuring method: TDM method
- Input voltage: any value between 0...300mV and 800V, ±150mV and ±800V
- Input current: direct 0...1 and 0...50mA, ±1 and ±500mA
Via shunt 0...300mV and 0...3V, ±150mV and ±3V
- Nominal input frequency: DC / 10...70...400Hz
- Measuring output: unipolar, bipolar or live-zero output quantities
- Power supply: 110 or 220V AC ±20%, 24V DC
- Housing for top-hat rail mounting E16
