Combine E950- Pxx Transducer Combine E950- Pxx Transducer converts to active or reactive power of a single phase or three phase system with balanced or unbalanced loads. The output signal is proportional to the measured value of the active or reactive power and is either a load independent DC current or load independent DC voltage.   Negligible effect of Power factor variation on accuracym   Narrow housing 70 mm. Saves space & therefore costs.   Measuring inputs: Sine or distorted wave forms of nominal input currents & nominal input voltages. Input distortion up to 10%.   Measuring principle: Time-division-multiplication (pulse duration modulation)   Ripple in out put current: < = 1% p.p.   Response time < 300 mS. Nominal input voltage 110/v3, 110, 230, 400V.   Nominal input current: 1 or 5 A   Power consumption: <0.1VA per current path, V x 1mA per voltage path.   Output: DC current 0-1/0-5/0-10/ 0-20mA or 4..20mA. Load Resistance max. 750 Ohms for 20mA. Power supply: ac voltage 24…230 or 240V +/-15%, 42 to 70Hz. Power consumption 5VA. dc voltage 24… 90 or 90…240V. Power consumption 5W   Power transducers with 3 phase 3/4 wire, balanced/unbalanced, active/ reactive.