|
|
|
|
Method of Detection |
 |
Dielectric polymer sensor that changes capacitance with moisture variation
|
|
Ranges Available |
|
-40°F to +104°F (-40°C to +40°C) Dew Point
|
|
Resolution |
|
±1°F (1°C) Dew Point
|
|
Accuracy & Repeatability |
|
±1°F (±1°C) Dew Point
|
|
Drift |
|
Less than 1% of full scale per month
|
|
Response Time (T-90) |
|
Less than 60 seconds after initial purge down
|
|
Ambient Temperature Range |
|
-18 to 49 ºC
0 to 120 ºF
|
|
|
Linearity |
|
Better than 1°F (1°C) Dew Point
|
|
Size & Weight |
|
19" W x 5.5" H x 14" D @ 15 lbs (48 x 14 x 36 cm @ 6.8 kg)
|
|
Power |
|
115 VAC, 60 Hz for recharging
220 VAC, 50 Hz available
|
|
Output Options |
|
4-20 mA or 0-1 VDC
|
|
Alarms |
|
High or low dew point alarms with LED (optional)
|
|
Hazardous Area Rating Options |
|
General Purpose, Non-Hazardous
|
|
| |
|
For continuous dew point analysis at atmospheric pressure of air, heat treat furnace gases, compressed air lines and other applications with oils or contaminants present.
| |
|
- Standard range of -40 to +68°F (-40 to +20°C) dew point. Other ranges and units of measure available on request
- Rugged design that is easy to operate
- Use on any non-corrosive gas
- Long-life dielectric polymer sensor
- May be calibrated in the field
- Bright digital readout
- Built in sample pump, filter, and flow meter
- NEMA 12 enclosure is standard
- Sensor easily replaced if contaminated
- Factory calibrated to NIST traceable standards
| |
|
- Recorder outputs of 0-1V or 4-20mA
- Calibration kit
- Also available in a NEMA 4 or NEMA 12 cabinets
- Carbon potential calibration using input from customer supplied Type 'K' thermocouple
| |
|
- Calibration is easily performed in the field using the optional calibration kit (Part no. NDPCK-02)
- Alternatively, the analyzer may be returned to Nova for a certified calibration
| | |
|
|
|
