|
|
产品名称:
WTRD1 PTC过热保护继电器
|

WTRD1 PTC过热保护继电器
Introduction:
主要通过PTC监测电机温度的继电器,通过内置于电动机的热敏电阻探头感测电机绕组温度,保护最为直接、准确; 可选择手动复位、自动复位; 保护标准电动机热过载; 保护变阻器、轴承、电容器等易发热器件; 适合于频繁起动、恶劣环境等特殊状况应用;此产品是中国继电器市场唯一通过美国ABS船级认证产品. |
It is a Winding Protection relay based on thermistor (PTC) . It offers protections against Over heating of the windings of pumps, motors, transformers, alternators etc. & sense the temperature with the help of PTC thermistor. It can be used with single or triple PTC & also with 6 or 9 PTCs as a special case. It can used for AC/DC motor, generator, transformer, winding protection against over heating of SCRs & Bus Bars. | |
|
Features: |
· Monitors Overload & Phase Loss, Phase Sequence by sensing Overheating of Windings. · Operates with Embedded PTC sensors in the motor / transformer windings. · Suitable for any PTC Thermistor. · Sensor Short / Open Condition Monitoring. · 1 CO output rated 230V AC / 5A (Resistive) · Auto (Optional Manual) Reset. · DIN Rail mounted Enclosure.
|
型号及名称 |
WTRD1 |
绕组保护继电器(PTC热敏继电器) |
供电电压 |
48/110/220-240/380-415/440VAC/ |
辅助 |
24VDC±10% |
输出触点 |
1CO |
跳闸设置 |
|
热敏传感器健康性 |
40Ω-4kΩ |
热敏传感器跳闸 |
4.1Ω-5.5KΩ |
热敏传感器开启 |
5.6K Ω及以上 |
热敏传感器短路 |
40Ω或更低 |
跳闸时间延迟 |
少于2秒 |
重置模式 |
自动/人工(可选) |
尺寸(mm) |
|
外形尺寸(长宽直径) |
76x30.5x117.5 |
指南针尺寸(长宽) |
68mm中央对中央 |
重量 |
300克 | |
|
| |
|
Application Areas: |
Injection Molding machines Machine tools Crane & hoist motors Compressors & fan motors | |
|
Technical Specifications: |
|
|
|
Specifications |
1 |
Supply Voltage |
Auxiliary 48 / 110 / 220-240 24 V DC ±10% |
2 |
Output Contacts |
1 CO |
3 |
Trip Setting |
Thermistor Sensor Healthy 40 ohm - 4 K ohm; Thermistor Sensor Trip 4.1 K ohm - 5.5 K ohm; Thermistor Sensor Open 5.6 K ohm & above; Reset 1.5 K ohm - 1.8 K ohm for 1/3 PTC 2.2 K ohm - 2.8 K ohm for 6/9 PTC |
4 |
Trip time delay |
Less than 2 secs. |
5 |
Resetting Mode |
Auto / Manual (optional) |
6 |
Dimensions (mm) |
Overall (L x W x D) 76 x 30.5 x 117.5; Mounting (L x W) 68 mm centre to centre |
7 |
Weight |
300 gms. | 
| |
|
|
|