| Introduction: |
| It is a 1 Phase Earth Fault Relay. It is best suitable for monitoring Earth Fault Current conditions for Motor / Pump loads. It is used in single phase system supply, where Under / Over Current monitoring or protection is required. It can be Rail mounted & have individually settable under / over current settings, thus increasing their utility as entire System Protection Relays. Added facility of adjustable Trip Time Delay and Power-ON Delay has also be provided, alongwith separate indications. | |
|
|
| Features: |
· Monitors Earth Fault currents.
· Instant Trip.
· Adjustable Over Current settings (0.1 – 2A)
· 1 CO output rated 5A / 230V AC (Resistive).
· LED indications for Power ON & Fault.
· Manual Reset.
· Sleek DIN Rail mounted housing.
| |
|
| |
|
|
| Application Areas: |
| General panels Motor starter panels HT motor starter panels Power distribution panels 3 phase UPS panels Centrifugal machine control panels | |
|
|
| Technical Specifications: |
|
|
|
|
|
Specifications |
| 1 |
Supply Voltage |
System 110 / 240 / 380 / 415 V AC ±20%; Auxiliary 12 V DC / 24 / 30 V DC ±10% |
| 2 |
Ext. Input |
5 A CBCT or 3 x 5A CT |
| 3 |
Output contact |
1 CO (Normal fail safe logic) |
| 4 |
Trip setting |
Under Current N.A.; Over Current 0.1 - 2 Amp (adjustable); Under Frequency —; Over Frequency —; Under Power —; Over Power —; Cos-Ø —; Reverse Power — |
| 5 |
Input Current Range |
— |
| 6 |
Power On Delay |
N.A. |
| 7 |
Trip Time Delay |
Instantaneous |
| 8 |
Resetting |
Manual |
| 9 |
Weight |
400gms. |
| 10 |
Dimensions (mm) |
Overall (L x W x D) 76 x 56.5 x 11.7; Mounting (L x W) 67 x 46 | |
