语言:       
高 品 质 产 品

专 业 化 服 务
 
  公司简介
  产品目录
  新闻中心
  支持与服务
  解决方案与应用
  销售网络
  联系我们

 

产品名称: LS-7卧式液体传感器



LS-7卧式液体传感器

Horizontal Liquid Sensor [Model LS-7]


Ronan Engineering抯 Models LS-7s and LS-7s Horizontal Liquid Sensors are designed to detect the intrusion of liquid in dry interstice double wall fiberglass tanks, containment zones and caisson compartments where horizontal positioning of the sensor is preferred. The integral Pull-to-Test cable on the LS-7s, required in some jurisdictions, allows sensor testing from ground level. Constructed of PVC the LS-7 and LS-7s will provide years of trouble-free service.

The LS-7抯 unique design cannot be installed upside down as is the case with sensors from other manufacturers. Liquid collection sufficient to raise the sensor float will transmit a signal to the control panel to initiate control functions or annunciate alarms.

The LS-7抯 thin cross section makes it ideal for applications where limited vertical clearance is available. The sensor may be installed in any horizontal application where there is 0.625 inches of vertical clearance.

Typical Applications

  • Double Wall Fiberglass Tank Dry Interstice Monitoring
  • Double Wall Piping Containment Sumps
  • Horizontal Application Point Level Sensing
  • Restricted Vertical Clearance
  • Where Ground Level Testing is Required

Ronan抯 LS-7 Sensor operates on a direct principle. A glass encapsulated, hermetically sealed, reed switch is embedded within the sensor body. A permanent magnet in the sensors float creates a magnetic field which surrounds the reed switch holding the switch closed. When the magnetic field is removed by moving the float, the reed switch is actuated, thereby changing state. This condition opens a closed switch. This change in state is then signaled to the control panel.

Specifications

  • Wetted Parts: PVC (Geon 87241)
  • Installation: Horizontal, 0.635 inch minimum vertical clearance
  • Switch Rating: SPST 10VA, 120-240Vac pilot duty
  • Temperature Operating -40篎 to +140篎
  • Liquid S.G.: 0.70 minimum
  • Pressure: 50 psi maximum
  • Cable: PVC jacket, twisted pair, 20AWG, 25 ft

 Related Support Material : Horizontal Liquid Sensor
  Key: [L]
= Registration Required - [R] = Reps Only
Knowledge Base
No Records
FAQs
No Records
Documents
No Records  

相关下载
 
2010©Copyright 康宝莱仪表(珠海)有限公司 allrights revered
美国地址:17888 67TH COURT NORTHLOXAHATCHEE FL 33470 US
中国地址 :中国广东省珠海市(国家)高新技术产业开发区金峰西路40号
电话:过程称重0756-3895797  物位测控0756-3895796  电量测量0756-3895799  流量测量0756-3895798  气体液体分析0756-3895799
传真:0756-3892788     邮箱 :sales@combine-inst.com     网站备案/许可证号:粤ICP备16107310号

配料系统  流量开关  流量计  称重事业部  失重喂料机(给料机) 珠海康宝莱