MBAS 9900閃光報警器

簡單介紹
警報信號裝置-MBAS9900（帶控制輸出） MBAS9900螢幕信號裝置可接受12/24V DC勢能輸入並也可提供對控制繼電器輸出的控制。附加的內置蜂鳴器使其可對信號裝置輸出進行完全的控制。這個輸出會被鎖住直到所有錯誤輸出被重置為止。MBAS9900現有4點和6點小視窗（30x30mm）配置。4點和6點系統都配有內置按鈕。 其他所有的規格和特徵都類似於MBAS9400類型警報信號裝置。 GENSET這種信號系統注意應用於genset面板，可對信號裝置進行直接的勢接觸。 本信號裝置有多種組合，像無24V DC故障觸點的內放置、蜂鳴器， 無勢觸點，用於DC故障的內置蜂鳴器，無內部蜂鳴器勢觸點等，為這種信號通訊裝置增加了多種應用選擇。

技術參數

參數	警報信號裝置-MBAS9900（帶控制輸出）
供電電壓	230 VAC/110ac,12V/24VDC/48V DC+10%-15%
窗口	4/6
視窗尺寸	30x30mm, 30x65mm
顯示設備	高亮度高效率低能耗LED
Facia類型	前面可置換
窗口/LED顏色	標準顏色 紅色， 選擇性顏色 黃色/琥珀色， 綠色
閃率	快速-60閃/分子， 慢-30閃/分子
反應時間	25msec±10
輸入信號	勢能自由觸點（NO或NC點，可選）
訊問電壓	+12 V DC
輸出觸點	1 NO+1 NO（可選）
接觸率	1安培240 V AC （有功部分）
結構	聯合性
操作順序	ISA 標準順序-自動/人工/First-up/Ringback(可選)或應需要也有其他順序
工作溫度	0-60度
功率消耗	每窗口1.5瓦

 

Introduction: It is a Audio Visual Alarm Annunciator. It is best suitable for Control Panels & Switchboards of Diesel Powered Generators, AMF Controllers with trip interlocks, Engine driven Compressors, Fire Fighting Pumps etc. It functions as a complete Annunciator with Control Function to monitor Alarm conditions with both Audio Visual indications. It senses the 12V DC or 24V DC potential contacts & offers output trip contacts for interlocking purpose. It has a built in audible devise. Acknowledged & Reset by built-in push buttons. It consists of 3 basic sections (The Power Pack, The CPU & The Facia) but with an exception that unlike the conventional Annunciators the CPU card accepts 12V DC or 24V DC potential contacts as fault inputs instead of potential free contacts.

Features: · Powerful Microprocessor Circuit. · For 4,6,8 windows (faults) · Fully Integrated Construction. · Built-in System Watchdog LED. · Optically isolated input circuit. · 12V / 24V DC Potential Contact Inputs. · 2 CO Trip Relay Output. · Operates on 24V DC Auxiliary supply. · Built-in Push Buttons (NA for 8 Pt.Model) · Built in Buzzer · Super Bright LED’s · Lower Power Consumption. · AC / DC Auxiliary Supply. · Manual Reset · Auto Reset.

Application Areas: Firstly, where Electrical Control Circuits work on + 24 V dc supply. MBAS 9900 operates on 24V dc supply. Secondly, where the user has to monitor following Alarm conditions with both Audio & Visual indications. Lube. Oil Temperature Lube. Oil Pressure Gen. Over Speed Jacket Water Temperature High Low Fuel Level Spare MBAS 9900 is available in 4 or 6 window configuration which meets the Requirement. Thirdly, where volt free contacts are not available & separate auxiliary relays, control relays are required which adds to the costs. MBAS 9900 accepts + 24V dc contacts directly from the control circuit. Fourthly, external push buttons & audible bell or buzzers are needed for conventional Annunciator. MBAS 9900 comes with built-in Push Buttons & built-in buzzer. Fifthly, where the user needs trip contacts, which is achieved by separate auxiliary relays & interlocked with other control circuits. MBAS 9900 comes with built-in 2CO trip contacts which are interlocked until all fault inputs normalize. Conventional relay & lamp design is always a clumsy design & tedious to trouble shoot. Most would prefer to avoid it as the cost of wiring up the components & labor is not worth it. The aesthetics cannot be better either. Best suitable for Control Panels & Switchboards of Diesel Powered Generators, AMF Controllers with trip interlocks, Engine driven Compressors, Fire Fighting pumps etc. Minilec MBAS 9900 can be used for following applications: The Diesel Generator Sets Panels Auto Mains Failure or Panels Diesel Engine Driven Screw Compressor Panel Diesel Engine Driven Crane Control Panel Gas based Captive Power Generator Panels

Technical Specifications:

Sr. Parameter Specifications 1 Supply Voltage 230 V AC / 110 V AC, 12 V / 24 V DC / 48 V DC +10% -15% 2 Windows 4 / 6 3 Window Sizes 30 x 30 mm, 30 x 65 mm 4 Display Device Super bright high efficiency low power consuming LED's 5 Facia Type Individual Windows Front Replaceable 6 Window/LED Colour Standard colours available RED, Optional colours Yellow / Amber, Green 7 Flash Rate Fast - 60 flashes/min. Slow - 30 flashes/min. 8 Response Time 25 msec. ± 10 msec. 9 Input Signal +12 V or 24 V DC Contact 10 Output Contacts 1 CO + 1 CO 11 Contact Rating 5 Amps 240 V AC (Resistive) 12 Architecture Integrated 13 Operational Seq. Sequence as mentioned in text OR any other sequence on request 14 Operational Temp. 0 0-60 C 15 Power Consumption 1.5 Watts per Window