|
WTRD1 PTC過熱保護繼電器
Introduction:
主要通過PTC監測電機溫度的繼電器,通過內置於電動機的熱敏電阻探頭感測電機繞組溫度,保護最為直接、準確; 可選擇手動復位、自動復位; 保護標準電動機熱超載; 保護變阻器、軸承、電容器等易發熱器件; 適合於頻繁起動、惡劣環境等特殊狀況應用;此產品是中國繼電器市場唯一通過美國ABS船級認證產品.
|
It is a Winding Protection relay based on thermistor (PTC) . It offers protections against Over heating of the windings of pumps, motors, transformers, alternators etc. & sense the temperature with the help of PTC thermistor. It can be used with single or triple PTC & also with 6 or 9 PTCs as a special case. It can used for AC/DC motor, generator, transformer, winding protection against over heating of SCRs & Bus Bars. | |
|
Features: |
· Monitors Overload & Phase Loss, Phase Sequence by sensing Overheating of Windings. · Operates with Embedded PTC sensors in the motor / transformer windings. · Suitable for any PTC Thermistor. · Sensor Short / Open Condition Monitoring. · 1 CO output rated 230V AC / 5A (Resistive) · Auto (Optional Manual) Reset. · DIN Rail mounted Enclosure.
| |
|
|
型號及名稱 |
WTRD1 |
繞組保護繼電器(PTC熱敏繼電器) |
供電電壓 |
48/110/220-240/380-415/440VAC/ |
輔助 |
24VDC±10% |
輸出觸點 |
1CO |
跳閘設置 |
|
熱敏感測器健康性 |
40Ω-4kΩ |
熱敏感測器跳閘 |
4.1Ω-5.5KΩ |
熱敏感測器開啟 |
5.6K Ω及以上 |
熱敏感測器短路 |
40Ω或更低 |
跳閘時間延遲 |
少於2秒 |
重置模式 |
自動/人工(可選) |
尺寸(mm) |
|
外形尺寸(長寬直徑) |
76x30.5x117.5 |
指南針尺寸(長寬) |
68mm中央對中央 |
重量 |
300克 | |
|
Application Areas: |
Injection Molding machines Machine tools Crane & hoist motors Compressors & fan motors | |
|
Technical Specifications: |
|
|
|
Specifications |
1 |
Supply Voltage |
Auxiliary 48 / 110 / 220-240 24 V DC ±10% |
2 |
Output Contacts |
1 CO |
3 |
Trip Setting |
Thermistor Sensor Healthy 40 ohm - 4 K ohm; Thermistor Sensor Trip 4.1 K ohm - 5.5 K ohm; Thermistor Sensor Open 5.6 K ohm & above; Reset 1.5 K ohm - 1.8 K ohm for 1/3 PTC 2.2 K ohm - 2.8 K ohm for 6/9 PTC |
4 |
Trip time delay |
Less than 2 secs. |
5 |
Resetting Mode |
Auto / Manual (optional) |
6 |
Dimensions (mm) |
Overall (L x W x D) 76 x 30.5 x 117.5; Mounting (L x W) 68 mm centre to centre |
7 |
Weight |
300 gms. |
|
|
|
|
|