|
|
|
|
Method of Detection |
 |
Customer replaceable electrochemical O2, CO and NO sensors
Solid state infra-red detector for CO2
|
|
Ranges Available |
|
0-20.0% CO2
0-200 to 0-2000 PPM NOx (as NO) ranges available
0-2000 PPM and 0-4.00% CO - Switch selectable
0-25.0% O2
|
|
Resolution |
|
0.1% O2 and CO2, 1 PPM CO and NOx
|
|
Accuracy & Repeatability |
|
Within ±0.1% O2 and CO2; ±10 PPM CO and NO
|
|
Drift |
|
2% full scale per 8 hours of continuous operation
|
|
Response Time (T-90) |
|
10-15 seconds for O2; 20-30 seconds for CO, NO, and CO2
|
|
Ambient Temperature Range |
|
0 to 40 ºC
32 to 105 ºF
|
|
|
Linearity |
|
±1.0% of full scale for each gas measured
|
|
Size & Weight |
|
16" L x 4 1/2" H x 8" D @ 13 lbs (40.6 x 20.3 x 10.8 cm @ 5.6 kg)
|
|
Power |
|
AC/DC Operation, 115 VAC 60 Hz for recharging (Other voltages available.)
|
|
Output Options |
|
4-20 mA or 0-1 VDC
|
|
Hazardous Area Rating Options |
|
General Purpose, Non-Hazardous
|
|
| |
|
Analysis of oxygen (O2), carbon monoxide (CO), carbon dioxide (CO2) and oxides of nitrogen (NOx as NO) in flue gas from furnaces, heaters, and boilers. May be used on commercial, industrial and residential combustion equipment.
| |
|
- Rugged design that is easy to operate and maintain
- Fast warm up and response
- CO2 actually measured by infra-red detector, not calculated
- Dual CO range : 0-2000 ppm & 0-4.00%
- Rapid reading recovery after CO or NO 'overdose'
- Digital readout meters with backlight
- Rechargeable battery operation
- Built in sample pump, filter and flow meter
- Active condensate removal
- Weatherproof (WP) cabinet with clear Lexan cover
- Stainless steel probe with sample hose
- Use on any fuel
| |
|
- Outputs of 0-1 V or 4-20 mA (can be isolated)
- Special sampling probes
- Suitcase (K) style cabinet available
- AC power only operation
- Gas alarms with LED
- Detachable/portable data logger
| |
|
- Air for O2 span and CO/CO2 zero
- Analyzed gas mixtures of CO2, CO, and NOx in nitrogen for span
| |
|
|
|
|
